北京塞车pk10计划视频

Consulting Hotline: 15169463938

Qingzhou Qiannuo Machinery Co., Ltd.

Contact: Manager Zhang

Fax: 0536-3579821

Phone: 151-6946-3938

Postcode: 262515

Address: Qingzhou Economic Development Zone, Shandong


Precautions for controlling spiral blade circuit systems

Spiral blades need electricity to provide energy and productivity during production. Therefore, we must strictly control the circuit system during production. Pay attention to the matters needing attention. The following introduces the control circuit system during blade production. Note:
1. Do a good job of cleaning up the working environment of the blades. There must be no flammable or explosive items, and the entry and exit of leisure and personnel should be prevented as much as possible.
2. Do a good job of checking whether the power supply is grounded, whether the system is working properly, whether there is leakage, and the inspection of the circuit system.
3. It should be used properly during startup to avoid overload operation, and the operator must not contact the working part of the blade for any reason, and any problems that occur during the operation must be stopped before handling.
4. During blade operation:
Although the wire has a certain insulation effect, people cannot touch the wire with their hands, because sometimes the wire will age and cause leakage problems. Once it is found that the work is not normal, the user must cut off the power in addition to turning off the machine, and then The machine is checked and processed.
The production of spiral blades depends on electricity. Therefore, the control of the circuit system needs to be done when using blades for production, but we must pay attention when using them. Do not touch them with your hands, otherwise it will overpower, especially those aging wires.
Editor: mxy