北京塞车pk10计划视频

Consulting Hotline: 15169463938

Qingzhou Qiannuo Machinery Co., Ltd.

Contact: Manager Zhang

Fax: 0536-3579821

Phone: 151-6946-3938

Postcode: 262515

Address: Qingzhou Economic Development Zone, Shandong


Storage of spiral blades

Spiral blades are mainly used to convey relatively viscous and compressible materials. When we are not using them, we need to do a good job of storing them so that they will not malfunction when used in the future. Let us introduce the storage of the blades:
First, the finished parts of the blade surface should be coated with grease and wrapped, and stored in a dry and ventilated place. The longer shaft should be placed flat or vertical, but it should not be tilted to avoid deformation.
2. Do not unpack the new leaves for the time being, but store them in a ventilated and dry place.
Third, to avoid direct contact between raw materials and products, only a protective film needs to be affixed to the surface of the spiral blade, which not only prevents the blade from being corroded, but also reduces production costs.
Fourth, the used blades should be cleaned with clean diesel to remove carbon deposits and other pollutants. After being assembled in pairs, put them in a container containing clean engine oil, and the height of the oil surface should not be exposed to the oil surface and the air. should.
5. In order to prevent the blade from rusting, you can use grease on its surface to isolate the moisture and impurities in the air, and place it in a ventilated and dry place, remove it when it is needed, carefully clean it and wait for it to dry thoroughly. Load the device.
We must meet the requirements of the environment, temperature and light when storing spiral blades. Of course, we must not forget to maintain it when storing it. We can regularly apply grease and prevent it from being corroded, which can also reduce production costs. .
Editor: mxy