北京塞车pk10计划视频

Consulting Hotline: 15169463938

Qingzhou Qiannuo Machinery Co., Ltd.

Contact: Manager Zhang

Fax: 0536-3579821

Phone: 151-6946-3938

Postcode: 262515

Address: Qingzhou Economic Development Zone, Shandong


Processing distance control of spiral blade

The spiral blade is no stranger to everyone. It is used to convey relatively viscous and compressible materials. During the processing, the distance between the blade and the blade must be reasonably controlled. The following describes the control of the blade processing distance:
First, the hardness is high, and the wear resistance is good, because during the blade processing, the cold forming is performed on the processing speed after cold rolling, which fully improves the hardness of the blade and has good wear resistance.
Second, along its outer hardness difference, wear during use, increase service life, smooth appearance. The appearance of the blade is bright and neat, which highlights the high precision, small resistance, and the output and difference of special materials, which promotes its practicality.
3. There is no welding feature in one-shot molding. This feature has outstanding advantages in assembly. When making the spiral blade assembly simple, it is easy to produce a production line in the production of lifting tools.
Fourth, the blade is a part of the output of the screw output machine, the main back knife completes the work. Increase the discharge opening or lengthen the end of the trough to solve the problem of poor or late discharge. At the same time, a small section of counter-rotating blades can also be installed at the end of the discharge slot to prevent the end from blocking.
The reason to maintain and control the processing distance of spiral blades is to avoid being too close to the situation that it cannot be processed or used, and cannot be turned. This should be understood by manufacturers, because many industries are waiting to use it.
Editor: mxy